Golf Club Groove U & V Sharpener Re-cuts Wedges Irons, Spin The Ball Like The Pros Complete With Handle by GOLFGROOVE SHARPENER

Shipping cost is calculated during checkout.

Out of Stock - stock arriving soon

Click images to enlarge

Introducing: Golf Club Groove U & V Sharpener Re-cuts Wedges Irons, Spin The Ball Like The Pros Complete With Handle by GOLFGROOVE SHARPENER

Go Shop Golf are happy to present the fantastic Golf Club Groove U & V Sharpener Re-cuts Wedges Irons, Spin The Ball Like The Pros Complete With Handle.

With so many available recently, it is great to have a brand you can recognise. The Golf Club Groove U & V Sharpener Re-cuts Wedges Irons, Spin The Ball Like The Pros Complete With Handle is certainly that and will be a perfect purchase.

For this reduced price, the Golf Club Groove U & V Sharpener Re-cuts Wedges Irons, Spin The Ball Like The Pros Complete With Handle is widely respected and is a popular choice amongst many people. GOLFGROOVE SHARPENER have provided some great touches and this results in great value.

Manufacturer Description

The GROOVE SHARPENER works by sharpening the rolled over metal edges that have collapsed in the grooves of your club whilst at the same time removing the particles of dirt, sand & grit within the grooves that have built up over time. It comes with two different cutting ends, one is U shaped, the other V shaped, you choose which one to use. How to use the Groove Sharpener. 1-Clean you club heads with soap and water to remove debris and wipe dry. Place masking/painters tape on the toe, heel and socket of the club, leaving the grooves exposed for servicing. Apply a few drops of lightweight oil to grooves; this will lubricate the cutting edge. This tool will work on all your irons and wedges that conform to the USAGA and R&A Guidelines. 2-Place the shaft of the club on your shoulder and hold the club head firmly in your hand. Place the desired end of the tool in the groove to be sharpened at about a 60-90 degree angle with you dominant hand. Holding the tool in your dominant hand, apply firm downward pressure, pushing the tool through the grooves towards the socket removing any nicks or rolled over metal. Repeat until the grooves are free of obstructions and sharp. If the grooves are severely damaged it may be easier to pull the sharpener through the grooves instead of pushing it. 3-Maintain you grooves by placing the U or V shaped end in the groove at a 80-90 degree angle to the face and move back and forth through the grooves. Make sure the tool is firmly seated in the bottom of the grooves. This will keep the walls of the grooves straight and sharp and the bottom of the grooves smooth. 4-It may take 20-30 minutes to recondition badly damaged grooves. Once you have the grooves sharpened it is easy to maintain them after every couple of rounds. Use the tool to clean the grooves in between hits. With some practice you will be able to spin the ball with your new grooves. NOW COMES WITH A BRAND NEW DESIGN HANDLE